Date of Award
5-2013
Document Type
Dissertation
Degree Name
Doctor of Philosophy (PhD)
Legacy Department
Automotive Engineering
Committee Chair/Advisor
Mears, Laine
Committee Member
Omar , Mohammed
Committee Member
Huang , Yong
Committee Member
Abu-Farha , Fadi
Abstract
Nickel-based superalloys are widely utilized in hostile environments such as jet engines and gas turbines due to their high resistance to oxidation, high corrosion resistance, good thermal fatigue-resistance and fracture toughness. Subsurface damage is typically generated during the machining of these materials, and in particular, ã'-strengthened nickel-based superalloys. The depth of the subsurface damage is a critical requirement specified by the customer. Therefore, it is critical to predict, measure and control subsurface damage.
This research specifically targets the development of a model to predict subsurface damage during the machining of ã'-strengthened nickel-based superalloys. To accomplish this, a modified Johnson-Cook model is developed to represent the plasticity behavior of the material using elevated temperature tests. The proposed model integrates a piece-wise method, strain hardening function, thermal sensitivity function, and flow softening function accurately model anomalous strength behavior. Material subroutines are developed for finite element analysis (FEA) simulation and applied with the ABAQUS/Explicit solver. Orthogonal cutting experiments are conducted to verify FEA results. Recrystallization techniques are utilized for estimation of the depth of subsurface damage. By comparing the subsurface damage between experimental and FEM simulation results, a threshold value is established for determining the depth of subsurface damage.
A high agreement between FEA simulation and experimental results is observed. From the cutting force aspect, the agreement is more than 90% for unaggressive cutting inputs. On the other hand, the model agreement is slightly lower, 85%, for aggressive machining conditions. This is due to the fact that the severe rake face wear cannot be comprehensively represented in the FEA simulation. In addition, the depth of subsurface damage predicted from the FEA simulations reached an agreement of 95% when compared to experimental findings. Therefore, a subsurface damage model between cutting inputs and depth of subsurface damage has been established based on the results derived from FEA simulations.
Recommended Citation
Chen, Yujie, "PREDICTION OF SUBSURFACE DAMAGE DURING MACHINING NICKEL-BASED SUPERALLOYS" (2013). All Dissertations. 1090.
https://open.clemson.edu/all_dissertations/1090