Date of Award
5-2013
Document Type
Thesis
Degree Name
Master of Science (MS)
Legacy Department
Materials Science and Engineering
Committee Chair/Advisor
Sanders, John P
Committee Member
Brosnan , Denis A
Committee Member
Skaar , Eric C
Abstract
Energy efficiency and energy savings are two topics that have continued to gain momentum over the last decade. This topic is extremely important when it comes to the construction of buildings and homes. Efforts have been ongoing to increase the insulation value of brick systems to hinder the conductive heat transfer through the material. The use of pore-forming agents (PFA’s) have been studied to increase the porosity within a ceramic system, through sacrificial burnout or place–holder method, which leave a residual, defined pore size distribution. This increase in porosity leads to better insulating capabilities and inherently lower conductivity values. In this study, varying types and sizes of pore-forming agents were investigated, such as organic fuels/wastes such as peanut hulls, commercially produced ceramic hollow spheres, and aluminum hydroxide. After extrusion and firing, the physical properties (bulk density, cold water absorption, flexural strength, pore size distribution) were investigated to relate to the effect on the thermal conductivity. Both size fractions of peanut hulls (−24/+50 M & −50/+100 M) suggested the lowest recorded thermal conductivity fired to 1100°C at 15% weight addition level at 0.399±0.010 and 0.422±0.011 W/m K, respectively.
Recommended Citation
Shepherd, Graham, "IMPROVING R-VALUE IN BRICK SYSTEMS USING VARIOUS PORE-FORMING AGENTS" (2013). All Theses. 1640.
https://open.clemson.edu/all_theses/1640