Analysis and Mitigation of Impacts of Plug-In Electric Vehicles on Distribution System During Faults
Date of Award
5-2014
Document Type
Thesis
Degree Name
Master of Science (MS)
Legacy Department
Electrical Engineering
Committee Chair/Advisor
Makram, Elham B
Committee Member
Gowdy , John N
Committee Member
Groff , Richard E
Abstract
With rising concerns for environment, energy security and gasoline prices, penetration of plug-in electric vehicles (PEV) is bound to increase in the distribution system. The load characteristics of the distribution system with PEVs will be considerably different and hence its effects on the system needs to evaluated. Determination of the characteristics of the impacts will help utilities to prepare methodologies in advance to accommodate this new kind of load. Batteries of most of these vehicles will be charged using a single phase power electronic chargers. To study impact of these chargers on distribution system during fault and fault recovery is the focus of this thesis. The IEEE 13 node test feeder and a single phase Level-2 battery charging system with current controlled and voltage controlled Voltage Source Converter (VSC) is modeled in PSCAD/EMTDC. A car park, with sixteen PEVs, each rated for 6.6 kW, is connected on each of the three phases, at one of the buses in the system. Temporary single line to ground fault (SLG) with auto-reclosure operation is simulated at the bus where the vehicles are connected. The response of the systems in terms of active and reactive power flows, voltage and current magnitudes is evaluated. Based on the observations, the charger is equipped with fault control logic and fault studies are repeated to gage its effectiveness.
Recommended Citation
Bihani, Himanshu, "Analysis and Mitigation of Impacts of Plug-In Electric Vehicles on Distribution System During Faults" (2014). All Theses. 1965.
https://open.clemson.edu/all_theses/1965