Date of Award
December 2019
Document Type
Thesis
Degree Name
Master of Science (MS)
Department
Packaging Science
Committee Member
Gregory Batt
Committee Member
Duncan Darby
Committee Member
Matthew Daum
Abstract
Corrugated boxes are relatively inexpensive and used extensively to contain and protect consumer products as they move through the distribution system, providing a much-needed function in today’s economy. Also, corrugated boxes are constructed from paper, which is affected by ambient moisture in the atmosphere. Relative humidity regularly varies between 30 to 90 percent depending on location and time of year. Above a relative humidity of 30 percent, paper fibers are affected, resulting in a decrease in the top-to-bottom compression strength of corrugated boxes. Therefore, understanding the moisture effect on box compression strength is essential. The goal of this study is to characterize the effect of relative humidity and, subsequently, the effects of moisture content on the compressive resistance of corrugated board boxes. A total of 3,000 industry supplied boxes are used to evaluate moisture content and compressive strength at seven relative humidity conditions from 30 to 90 percent. Three sets of conditions are repeated to test repeatability for a total of ten batches tested overall. Preconditioning and conditioning of all specimens meet or exceed the requirements of TAPPI T402. All specimens are compression tested by following TAPPI T804. Further, all compression testing is performed in an environmental chamber at test conditions to ensure uniformity. The moisture content for three out of every ten specimens is recorded using a loss-upon-drying moisture balance. Results indicate a second-order polynomial increase in moisture content as a function of relative humidity. The compression strength of corrugated boxes is found to vary linearly with moisture content for the range tested and follows a second-order polynomial decrease with increasing relative humidity. The data from this study are compiled into a table of corrugated box strength reduction factors for comparison with the results from previous studies.
Recommended Citation
Brown, Gary Ashton, "Relative Humidity Effects on the Compression Strength of Corrugated Boxes" (2019). All Theses. 3225.
https://open.clemson.edu/all_theses/3225