Date of Award
5-2017
Document Type
Thesis
Degree Name
Master of Science (MS)
Legacy Department
Mechanical Engineering
Committee Member
Dr. Michael M. Porter, Committee Chair
Committee Member
Dr. Joshua Summers
Committee Member
Dr. Nicole Coutris
Abstract
The purpose of this study is to build and test a pneumatically actuated robot based on the biomimetic design of a seahorse tail. McKibben muscles, a form of pneumatic actuator, have been previously used to create highly flexible robots. It has also been discovered that the seahorse tail serves as a highly flexible and prehensile, yet armored appendage. Combining these topics, this research aims to create a robot with the mechanical flexibility of a pneumatic actuator and the protection of a seahorse tail. First, the performance of a miniature McKibben muscle design is examined. Then, the artificial muscles are implemented into a 3D-printed seahorse tail-inspired skeleton. The robot's actuation was observed to determine its maximum bending capacities. The results of the experiments revealed that the miniature McKibben muscles performed comparably to larger sized McKibben muscles previously reported in literature. The pneumatically actuated robot achieved a maximum bend angle of ~22°. Further research is recommended to determine the behaviors of similar robots with additional plates or McKibben muscles spanning shorter plate sequences.
Recommended Citation
Holt, Justin Dakota, "Design and Testing of a Biomimetic Pneumatic Actuated Seahorse Tail Inspired Robot" (2017). All Theses. 2637.
https://open.clemson.edu/all_theses/2637